*Flow Control:
This function complies with IEEE802.3x
*Aging Timer:
The longest time for packets queuing in the buffer is 300s.
* Reserved Address Forward Filter:
CS-Fx2 supports the ability to drop 802.1d specified
reserved group MAC address: (01-80-C2-00-00-04 to 01-80-C2-00-00-0F). Frames with
group MAC address 01-80-C2-00-00-01 (802.3x Pause), 01-80-C2-00-00-02 (802.3ad
LACP) will always be filtered.
* Port Base VLAN:
Port Base VLAN groups are defined as following; (P0, P7), (P1, P7),
(P2, P7), (P3, P7), (P4, P7), (P5, P7), (P6, P7)
* Power Saving Mode:
The 10M transmit amplitude is depressed in this mode.
* LDPS (Link Down Power Saving) Mode:
When the system link is down, it will
automatically switch to this mode once this function is enabled. In this mode, the
system will save power up to 25% by decreasing the frequency of FLP (fast link pulse).
* MLT3_DET:
CS-Fx2 supports the ability to detect MLT3 (for 10Mbps switch to
100Mbps)
* Broadcast Storm Protection:
A port begins to drop packets if it receives broadcast
packets more than the defined threshold.
* Aggressive Back Off Mode:
CS-Fx2 adopts modified (aggressive) back off algorithm
if this function is enabled. The maximum back off period is limited to 8-slot time. It
makes CS-Fx2 have higher transmission priority in a collision event.
* Port 6, 7 of High Priority:
Packets received from port 6 or port 7 are handled as high
priority packets if the function is enabled.
* Class of Service:
Packets with high priority tag are handled as high priority packets
if the function is enabled.
* Max Packet Size Option:
CS-Fx2 will drop packets with length longer than 1536
bytes if the function is enabled. On the contrary, it will drop packets with length
longer than 1552 bytes.
* OES-224A
is a SNMP manageable switch equipped with 24 100Mbps ports, and 2
Gigabit ports for uplink connection. All the Gigabit and 100Mbps ports are in
modular design, with TP or Fiber option. For complete specifications, please contact
Wamin Optocomm Mfg. Corporation.
* CS-1000
series 1000Base-T to 1000Base-SX/LX Media Converters are economical
and convenient choices to extend the distance between Gigabit Ethernet
connections with the use of fiber optical cable. For complete specifications, please
contact Wamin Optocomm Mfg. Corporation.
* CS110
series are the 10/100 Base-TX to 100 Base-FX media converters designed for
workgroups requiring high bandwidth fiberoptic extension of their existing Ethernet
Network. For complete specifications, please contact Wamin Optocomm Mfg.
Corporation.
07
*CS1000
*CS1000
CS-Fx2
CS-Fx2
100Base-Fx Fiber
100Base-Fx Fiber
100Base-Fx Fiber
10 /100Base -T(X) Auto Sensing
6LAN
10 /100Base -T(X) Auto Sensing
6LAN
3. Daisy Chain Application:
For information of the asterisked apparatus, please refer to note.
Note:
*SCA (Smart Cable Analysis):
CS-Fx2 performs SCA on TP each port and shows the
test result on LEDs. This function is valid only under Point to Point Ethernet connection
with SCA implemented on both end apparatuses. The following table shows the LED
behavior of a port performing SCA
Link_LED
SPEED_LED
FDX_LED
SCA initiation
Scan port by port Scan port by port Scan port by port
(Under testing)
Running Horse LED:
On 286ms-> Off 2s-> On 286ms-> Off 2s
Test fail
On-Off-On-Off
On-Off-On-Off
Off
An open cable with length On
Off
Off
short than 40m open
An open cable with length Off
On
Off
between 40m and 80m
An open cable with length On
On
Off
between 80m and 120m
An shorted cable with
Flash
Off
Off
length shorter than 40m
An shorted cable with length Off
Flash
Off
between 40m and 80m
An shorted cable with length Flash
Flash
Off
between 80m and 120m
Cable is normal
Off
Off
Off
.
