Specifications
Standard:
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3x Flow Control Ethernet Standards
Interface:
TP: 10Base-T/100Base-Tx RJ45, 6 ports
LED:
Power, Link, Speed, FDX
Power:
Power Supply, 5VDC, 2A
Operating temperature & humidity:
0~50°C/10%~90% (non-condensing)
Dimension:
173.2x27.1X107.4mm (WxHxD)
Weight:
500g±3%
MAC Address:
1k
Data Buffer:
512k
Optional Function:
SCA (Smart Cable Analysis), Flow Control, Aging Timer, Reserved Address Forward
Option, Port Base VLAN, Power Saving Mode, LDPS (Link Down Power Saving Mode),
MLTS detection, Broadcast Storm Protection, Aggressive Back Mode, Port 6, 7 of High
Priority, Class of Service, Max Packet Size Option, Port 6, 7 of Half Duplex
Installation
Please place the system where it will not be subject to extreme temperature
change, humidity or electromagnetic interference. Operating temperature range is
between 0°C and 50°C. Humidity should be between 10% and 90% and be
non-condensing. Please ensure adequate ventilation is provided for system cooling.
Do not block the ventilation holes on either side of the chassis. The CS-FX2 switch is a
plug-and-play device. Optional functions provided can be set by the DIP switches
mounted on the host board. Please refer to the correlative description in this
instruction manual for the settings of DIP switches.
03
LED Indicators
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
D
S
L
LINK
SPEED
DUPLEX
8
7
6
5
4
3
2
1
LED No.
Function
Status
Description
1
ON
Power on
POWER
OFF
Power off
2
LINK
ON
link ok
OFF
link fail
Flash
TX/RX
3
SPEED
ON
100 Mbps
OFF
10 Mbps
4
DUPLEX
ON
full duplex
OFF
half duplex
Flash
collision
