Walvoil DPC130X Скачать руководство пользователя страница 10

D1WWTD02E

10

Service Manual

DPC130X

General specifications

 ___________________________________________________________________________________

• Never use the control valve at a pressure exceeding the rated pressure in order to avoid to breack it;
• 

use the control valve within the rated flow in order to avoid malfunction or a deterioration in the heat balance. If the control 

valve is used beyond the verified working conditions range, we shall not be responsible for any accident which may accur;

• 

do not use low-cleanless hydraulic fluid in order to avoid seal failure or damage to seal parts, which could cause the machine 

operation failure or an operation mistake;
• 

use the control valve at the environmental conditions specified in the previous datasheet. If the Control Valve is used outside 

the specified range, we shall not be responsible for any accident which may occur;

• 

Use the control valve with the working fluid specified in this manual. If the control valve is used beyond the specified range or 

with different working fluid properties, we shall not be responsible for any accident which may occur.
For any doubt please contact our After-sales Department.

WARNING

WARNING

Cast iron

O-ring seals

& Parback

Spring steel

Other steel

Other

Cast iron EN-GJl-250

NBR 70 Sh

AISI 302

11SMnPb37

Sint. A50

Cast iron EN-GJL-300

VITON 75 Sh

VDSiCr EN10270-2

16CrNi4Pb

Cast iron EN-GJV-300

NBR 90 Sh

FDCrSI

36SMnPb14

Teflon (PTFE)

Quench Steel 

35SMnPb10

Poliurethane

AISI 302

Class B Steel

AISI 316

INOX Steel

OTEVA 60

INOX A2/304 Steel

OTEVA 70

X10CrNiS1809
3CD60 Steel
Class 8.8 Steel
Class 10 Steel
Class 10.9 Steel
Class 12.9 Steel
C43
ETG100
Fe37
MIM 4605
Sint. C39
Sint. D35

All the material installed by the manufacturer are in accordance with UNI CEI EN ISO 80079-36:2016

Do not store the Walvoil product:
• in places where it could be damaged;

• outside a temperature and pressure range specified in environmental datasheet (see pag.7);

• where it could get wet;
• where it could come in contact with organic solvents, acids, alkalis and/or dangerous gases;

• in places subject to sudden, significant temperature changes;

• in zones where a potential explosive atmosphere can occur also with a very low probability.

• remove the packaging only just before assembling the product;

• Walvoil is not responsible for any damage due to a storage not in compliance with our prescriptions;
• for any doubt, please contact our After-sales Department.

Storage

 ______________________________________________________________________________________________________

Содержание DPC130X

















Отзывы: