18
a
b
a
a
b
5.1 Vertical parking
Affixing the torque support should be done such that the
coupling plane of the tool side of the changing system
creates a vertical plane
. Vertical parking can take place in both directions.
-
Use a precision spirit level to check whether the milled edge of the parking head is horizontally aligned.
If this is not the case then the frame must be aligned vertically as described in “Securing, aligning,
and adjusting tool parking stations”.
-
Determine the necessary mounting dimensions (measurements a and b in example) for the torque support.
(Dependent on the customer structure of the tool and direction of parking).
-
If necessary, professionally remove the surface coating for a suitable welding process.
-
Affix the selected torque support to the determined position, e.g. through welding.
-
Ensure vertical alignment of the coupling plane. The length of the threaded bolt (measurement b)
can be amended for fine adjustments.
See “Securing, aligning, and adjusting tool
parking stations based on images”
-
Ensure the final position of the torque support by tightening
the hexagon nut.
-
Check the vertical alignment of the coupling plane, e.g.
with a back square
(see “Aligning the tool parking station vertically”).
5.2 Horizontal parking
Affixing the torque support should be done such that the
coupling plane of the tool side of the changing system creates a horizontal plane
:
-
Use a precision spirit level to check whether the milled edge of the parking head is
horizontally aligned. If this is not the case then the frame must be aligned vertically
as described in “Securing, aligning, and adjusting tool parking stations”.
-
Determine the necessary mounting dimensions (measurements a and b in example) for
the torque support. (Dependent on the customer structure of the tool).
-
If necessary, professionally remove the surface coating for a
suitable welding process.
-
Affix the selected torque support to the determined position e.g. through welding.
-
Ensure horizontal alignment of the coupling plane. The length of the threaded bolt
(measurement b) ca
n be amended for fine adjustments. See “Securing, aligning,
and adjusting tool parking stations based on images”
-
Ensure the final position of the torque support by tightening the hexagon nut.
-
Check the vertical alignment of the coupling plane, e.g. with a back square
(see “Aligning the tool parking station vertically”).
a
b
Roller
Bolt and
bush
Roller
Rolle
Examples:
Содержание 95813
Страница 7: ...7 4 4 Drill pictures for level settings...
