WALTHER PILOT wa 705 series, Руководство по эксплуатации

Страница: 13 / 49

25 24
Contents
Exploded Drawing 2
Declaration of CE-Conformity 25
Replacement parts 26
1 General 30
1.1 Identification of Model Version 30
1.2 Normal Use 30
1.3 Improper Use 31
2 Technical Description 31
3 Safety Warnings 32
3.1 Safety Warting Symbols 32
3.2 Generally Applicable Safety Precautions 32
4 Assembly / Installation 33
4.1 Mounting of Spray Gun 33
4.2 Connection of Input Lines 33
5 Operational Handling 34
5.1 Safety Warnings 34
5.2 Starting/Stopping Requirements 34
5.3 Spray Pattern Test 34
5.4 Spray Pattern Adjustments 35
5.5 Correcting of Spray Pattern Imperfections 36
5.6 Retooling of Spray Gun 36
6 Cleaning 37
6.1 Safety Warnings 37
6.2 Cleaning - Complete 37
6.3 Cleaning - Routine 38
7 Repairs / Replacements 39
7.1 Replacement of defective Needle Seal Packings 39
7.2 Replacement of Nozzles, Needles, Springs 39
and Seals
8 Trouble shooting and Corrective Action 40
9 Disposal of Cleaning / Servicing Substances 40
10 Specification Data 41
EC/EU Declaration ofConformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility that the product(s)
described below conform to the essential safety requirements. This declaration will be rendered invalid if any
changes are made to the equipment without prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Automatic Spray Gun
PILOT WA 705 -Serie without internal control
WA 705 (Standard) V 20 705
WA 715-U (Standard-circulation) V 20 715
WA 725-HVLP (Low pressure) V 20 725
WA 735-HVLP-U (Low pres.-circulation) V 20 735
WA 745-HVLP
PLUS
(Medium pressure) V 20 745
WA 755-HVLP
PLUS
-U (Medium pres.-circulation) V 20 755
WA 708-K (Standard-adhesive version) V 20 708
WA 718-U-K (Standard-adhesive vers.-circul.) V 20 718
WA 728-HVLP-K (Low pressure-adhesive version) V 20 728
WA 738-HVLP-U-K (Low pressure-adhesive vers.-circul.) V 20 738
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
DIN EN ISO 12100
DIN EN 1953 DIN EN 13463-1
DIN EN 1127-1 DIN EN 13463-5
Specification according 2014/34/EU
Category 2 Part marking
II 2 G c T 5
Tech.File,Ref.:
2414
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is prohibited until such
time as the end product has been proved to conform to the provision of the Directives 2006/42/EC.
Wuppertal, the 2nd of November 2016
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
p.p.