WALTHER PILOT PILOT WA 705, Руководство по эксплуатации

Страница: 23 / 50

8 Troubleshooting and Corrective Action
Warning
Prior to any servicing and repair work: Make sure that the spray gun is in unpressuri-
zed condition, i.e. all air and material inputs must be shut off - if not, imminent risk of
injury.
Fault Cause Remedy
Gun is dripping Material nozzle or needle
fouled
Material nozzle or needle
damaged
Packing screw too tight
see 5.5 Retooling the Spray
Gun and cleaning
see 7.2 Replacing Material
Control Nozzle or Needle
Loosen packing screw
(item 15) in slightly with a
screw driver
Gun fails to open Control air pressure too
low
Increaese control air pressu-
re to at least 4.5 bar
Material leaks from
leakage boring
Needle packing leaks
Packing screw too loose
see 7.1 Replacing Needle
Packing
Tighten packing screw
(item 15) in slightly with a
screwdriver
Spray jet pulsating or
unsteady
Level in material tank too
low
Top-up material level (see
operating instructions of plant
systems manufacturer)
9 Disposal of Cleaning / Servicing Substances
Disposal of any such substances must be in accordance with all applicable local and
national regulations, directives and laws.
Warning
Pay special attention to all processing specifications and safety warnings issued by
the manufacturers of spraying and cleaning media.
The improper disposal of any toxic waste material represents a serious threat to the
environment, i.e. to the health of mankind and animal life.
14 15
10 Specification Data
Weight: 623 g
Nozzle Sizes: ▪ 0,3 ▪ 0,5 ▪ 0,8 ▪ 1,0 ▪ 1,2 ▪ 1,5 ▪ 1,8 ▪ 2,0
▪ 2,2 ▪ 2,5 ▪ 3,0 ▪ 3,5 mm ø
Connections:
Atomizing Air G 1/8 “
Control Air G 1/8 “
Material Inlet G 1/4 “
Pressure Ranges:
Control Air min. 4,5 bar
Material pressure max. 8 bar
Atomizing Air max. 8 bar
max. Operating Temperature
of Spray gun 80 °C
Sound Level
(measured at a distance
of 1 m from the spray gun) 86 dB (A)
Air Consumption
:
Air cap Air input of the
Air consumption
spray gun
Air consumption
PILOT WA 705 / 715 1031 4,0 bar 360 L/min.
PILOT WA 725 / 735
HVLP
1061 3,5 bar 340 L/min.
PILOT WA 745 / 755
HVLP PLUS
1060 3,4 bar 290 L/min.
Right to effect technical changes reserved.