22
23
Listing of Replacement Parts:
PILOT WA 500
Item Parts No.
Description
No.
1
V 11 360 04 300
Retaining Ring
2
option of
Air Control Head **
V 11 360 30 060
f. noozles 0.3 - 1.8 mm ø
V 11 360 30 210
f. noozles 2.0 - 2.5 mm ø
3
option of
Material Outlet Nozzle
V 11 601 40 . . 3* **,***
4
V 09 002 16 000
Sealing Washer
5
V 11 601 04 000
Air Distribution Ring
6
V 20 510 14 003
Fastening Screw
7a V 20 510 10 500
Front Body
8
V 20 510 13 003
Material Connection Nipple
9
V 09 001 72 000
Needle Seal Packing
compl.
10 V 10 361 07 000
Pressure Ring
11 V 20 510 12 003
Packing Spring
12 V 20 510 11 003
Packing Screw
13 V 09 001 70 000
Seal
14 V 20 510 42 003
Sealing Screw
15 V 09 102 02 007
O-Ring
16 V 20 510 40 000
Piston Casing
17 option of
V 20 510 21 003
Mounting Pin 12 mm ø
V 20 510 21 103
Mounting Pin 14 mm ø
18 V 11 601 20 000
Round Jet Control
19 V 11 601 20 000
Flat Jet Control
20 V 00 101 70 005
Barrel Nipple
21 V 00 101 01 000
Barrel Nipple
22 V 09 230 01 000
Piston Casing Sealing
23 V 09 103 27 001
O-Ring
24 V 20 510 24 004
Piston-Boss Bushing
25
V 09 102 09 000
O-Ring
26 V 20 510 23 004
Piston
27 V 20 510 47 004
Bushing
28 V 09 102 02 001
O-Ring
29 V 20 651 06 000
Cup Seal
30 V 20 510 18 004
Clamping Washer
31 V 20 510 16 004
Piston End Nut
32 V 20 606 11 000
Piston Spring
33 V 20 510 33 000
Threaded Ring
34 option of
Material Control Needle
V 20 510 30 . . 3* **,***
35 V 20 510 29 003
Needle Spring
36 V 20 510 32 000
Cap
37 V 20 510 34 000
Drawbar
Listing of Replacement Parts for
Models PILOT WA 510 / 520 / 530
(deviating from PILOT WA 500)
PILOT WA 510 (Circulation Version)
Item Parts No.
Description
No.
7b V 20 510 19 510
Front body
PILOT WA 520 (HVLP Version)
Item Parts No.
Description
No.
2
option of
HVLP Air
Control Head
V 11 631 15 011
High-finishing air head
nozzle sizes 0,5-1,8 mm ø
V 11 631 15 012
High-finishing air head
nozzle sizes 2,0-2,5 mm ø
V 11 631 10 060
for fillers - 0,3-1,8 mm ø
V 11 631 10 210
for fillers - 2,0-2,5 mm ø
V 11 631 11 061
for paints - 0,3-1,8 mm ø ***
V 11 631 11 211
for paints - 2,0-2,5 mm ø
5
V 11 631 04 000
Air Distribution Ring
7a V 20 510 10 520
Front Body
16 V 20 510 50 000
Piston Casing
PILOT WA 530 (HVLP Version for
Circulation Operation)
Item Parts No.
Description
No.
2
option of
Low-Pressure Air
Control Head
V 11 631 15 011
High-finishing air head
nozzle sizes 0,5-1,8 mm ø
V 11 631 15 012
High-finishing air head
nozzle sizes 2,0-2,5 mm ø
V 11 631 10 060
for fillers - 0,3-1,8 mm ø
V 11 631 10 210
for fillers - 2,0-2,5 mm ø
V 11 631 11 061
for paints - 0,3-1,8 mm ø***
V 11 631 11 211
for paints - 2,0-2,5 mm ø
5
V 11 631 04 000
Air Distribution Ring
7b V 20 510 10 530
Front Body
16 V 20 510 50 000
Piston Casing
PILOT WA 570-K, 571-K, 572-K, 573-K
(Spray Guns for Adhesives)
Item Parts No.
Description
No.
2
option of
Air Control Head
V 11 631 12 055
(0,8 - 1,0 mm ø)
V 11 631 12 205
(1,2 - 1,8 mm ø)
V 11 631 12 255
(2,0 - 2,5 mm ø)
3
V 11 641 40 . . 3* Material Outlet Nozzle ****
4
Sealing washer
is not applicable
7a V 20 570 10 500
Front Body WA 570-K
7a V 20 570 10 510
Front Body WA 571-K
7a V 20 570 10 520
Front Body WA 572-K
7a V 20 570 10 530
Front Body WA 573-K
34 V 20 570 30 . . 3* Material Control Needle ****
*
Please indicate noozle size when ordering.
We recommend that repair sets are held on stock.
Repair sets include all wearing parts shown in boldface
print.
** contained in Noozle sets:
V 15 500 06 . . 3
*** contained in Noozle sets:
V 15 520 03 . . 3
**** contained in Noozle sets:
V 15 572 02 . . 3
1
General
1.1
Identification of Model Versions
Models:
Automatic Spray Gun PILOT
WA 500, WA 510, WA 520, WA 530
WA 570-K, WA 571-K, WA 572-K,
WA 573-K
Type Series:
20 500 WA 500
(Standard)
20 510 WA 510
(Circulation Systems)
20 520 WA 520
(System HVLP)
20 530 WA 530
(System HVLP - circulation systems)
20 570 WA 570-K (Adhesive application version)
20 571 WA 571-K (Adhesive application version - circulation systems)
20 572 WA 572-K Adhesive application version - System HVLP)
20 573 WA 573-K (Adhesive application version - System HVLP
- circulation systems)
Manufacturer:
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327 Wuppertal (Germany)
Tel.: 0202/787-0
Fax: 0202/787-2217
www.walther-pilot.de • Email:[email protected]
1.2
Normal Use
The automatic spray guns of the series PILOT WA 500 are exclusively designed for
use with sprayable material types and grades. All wetted parts are made of stainless
steel so as to permit handling of watersoluble and/or agressive media such as:
•
paints and lacquers
•
greases, oils and corrosion preventives
•
adhesive compounds
•
ceramic glazes
•
acidiferous media and
•
pickling solutions
Should the materials which you want to spray not be listed above, please contact us
for further and detailed information.
Plase note that sprayable materials may only be applied to work pieces and/or simi-
lar items. The temperature of the spraying materials shall never exceed 80 degrees
Celsius. The models of the series PILOT WA 500 are not designed for manual opera-
tion, and must be installed in a suitable gun mounting device.
The term normal use also implies that any and all safety warnings, operational hand-
ling details, etc., as stated in these operating instructions, must be carefully read,
understood and duly complied with.
This equipment complies with the explosion protection requirements of Directive
94/9/EC (ATEX) for the explosion group, equipment category and temperature class
indicated on the type plate. When using the equipment, the requirements
specified in these Operating Instructions must be observed at all times.
