WALTERSCHEID SW40, Руководство по эксплуатации

Страница: 129 / 156

25
3.6 Warning Signs
There are warning signs attached to the special tool. Warning signs
indicate danger points on the special tool and warn about residual
risks which can occur in a specific situation or in connection with a
certain action.
Always keep these warning signs in a clean and legible condition.
Replace illegible signs. Request the warning signs from your dealer
using the part number.
A warning sign consists of 2 pictograms:
(1) Pictogram for the description of the haz-
ard
The pictogram shows the pictorial descrip-
tion of the hazard, surrounded by a triangu-
lar safety symbol.
(2) Pictogram for prevention of the hazard
The pictogram shows the pictorial instruc-
tion for preventing the hazard.
Explanations of the warning signs
The following list contains:
•
all the warning signs present on the special tool in the right-hand
column,
•
the following information about the warning sign on the right in
the left-hand column:
1. The part number.
2. The description of the hazard, e.g. "Crushing hazard for fingers
or hands when moving the mounting carriage by the approach of
moving parts to stationary parts!"
3. The consequences for ignoring the instruction(s) for prevention
of the hazard, e.g. "These hazards can cause severe injuries
with loss of parts of the body"
4. The instruction(s) for preventing the hazard, e.g. "Never reach
into the dangerous place while parts can still move. Send any
third persons out of the danger zone of the special tool before
you move the mounting carriage".