Walter WWS-IGS1000, Оригинальная инструкция по эксплуатации

Страница: 68 / 216

Using the power generator
68
EN
• Switch the on/off switch
19
of the
engine to “OFF“.
• Close the Petrol cock. Turn it
clockwise until the blade is in the
"OFF" position.
Switching off the power generator
Connecting the electrical equipment
• Plug the mains plug of the electrical equipment into the power socket.
16
.
Operate only one electrical equipment at a time at the socket and do not use
multiple distributors.
• Switch off the connected electrical equipment.
• Unplug the mains plug from the power socket.
16
.
• Allow the generator to run briefly without load before switching it off so that
the generator can "cool down".
If you are using an extension cord, follow the instructions for extension cords
(see chapter "Safety").
WARNING!
The rated power of the connected load should not exceed the rated
power of the generator. Check the rating plate of the electrical
equipment that you want to connect.