Walter 630351, Руководство по эксплуатации

Страница: 42 / 136

Usage
42
EN
Connecting the power
Please note:
• Use an extension cable if the work area is not close to the mains outlet.
Ensure that the cross section of the extension cable is at least 1.5 mm². If
necessary, ask the dealer for advice when purchasing.
• The extension cable used should be as short as possible.
• Ensure the mains cable does not pose a tripping hazard.
Usage
• Ensure that the saw blade is securely fixed.
• Make sure that all fastening screws and clamping mechanisms are tightened
properly.
• Make sure that the saw blade can swing freely and is not obstructed.
• The area around the saw blade should be free of saw dust and chips.
• Always wear safety glasses and hearing protection and a dust mask or
respirator.
• Carefully check the workpiece for concealed nails or other similar objects
before you start sawing.
• Connect the product only to a socket that is properly earthed.
• The product is designed for use with single-phase AC 230 - -240 V ~ / 50 Hz
and has protective insulation. Check if the existing mains voltage matches
with the specification on the rating plate of the product.
• Ensure that water does not come near the electrical parts of the product, as
well as near anyone who is in the work area.
WARNING!
Check the following points carefully each time before using the saw.