Walter 630351, Руководство по эксплуатации

Страница: 36 / 136

Safety
36
EN
b) Avoid bodily contact with earthed objects such as pipes,
radiators, ovens and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Keep power tools out of rain and wet environments. Water
entering a power tool will increase the risk of electric shock.
d) Do not use the power cord for purposes for which it is not
intended, such as carrying or hanging up the power tool, and
do not pull the cord to disconnect the tool from the mains. Keep
the power cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled power cords increase the risk of
electric shock.
e) When operating the power tool outdoors, use only extension
cords suitable for outdoor use.
Using an extension cord suitable
for outdoor use reduces the risk of electric shock.
f) If you need to use the power tool in a damp environment, use
a residual current protection device. Using a residual current
protection device reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious injury.
b) Wear personal protective equipment and always use safety
goggles.
Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional start-up. Ensure that the switch is in the
off-position before
connecting to the power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the
switch or connecting it to the mains with the switch in on-position,
may result in accidents.
d) Remove any adjusting tools or keys before you switch the
power tool on. A tool or a key left in a rotating part of the power tool
may result in injuries.
e) Avoid working with your body in an unusual position. Ensure
proper footing and balance at all times.
This enables better control
of the power tool in unexpected situations.