Walter 39-D 252, Руководство пользователя

Страница: 12 / 72

12
8) GEAR SELECTION
The Icecut 250Auto magnetic drill is fitted with a 2-speed gearbox.
The gear is used to reduce the output speed when using larger cutters.
Slide Selector Position Speed Controller Setting
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
High Speed /\ 200/min 260/min 320/min 380/min 440/min 500/min
Low Speed \/ 100/min 133/min 166/min 199/min 232/min 265/min
9) MAGNET DETECTION
It is advised that when working on thin material a packing piece should be used to increase the material
thickness under the magnet. Working on thin material without a packing piece will reduce the magnet
holding force.
It is advised that the drill is to be operated on ferrous material 12mm thick and above. Damage to the
magnet base, such as pitting, will affect the strength of the magnet holding force.
Slide Selector Position Up Slide Selector Positon Down
Material Thickness in mm
Kg