![walser 16773 Carbon Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/walser/16773-carbon/16773-carbon_user-manual_3275690023.webp)
23
4. Insert a new glass tube fuse (F5AL250V) onto the spring
8
.
5. Place the plug tip back on top of the new fuse.
6. Turn the screw cap clockwise to the 12V connector
7. Storage
- Allow the heated seat pad to cool completely.
- Store the heated seat pad in a clean, dry place.
- Keep the heated seat pad out of reach for children.
- Avoid that the heated seat pad is kinked during storage by heavy objects
being placed on it.
- Do not weigh down the heated seat pad with heavy objects.
8. Troubleshooting
For faults not listed here, please contact the manufacturer.
Fault
Possible cause
Rectification
The heated
seat pad is not
functioning.
The 12V connector is
not plugged into the
12V vehicle power
connector.
Plug the 12V plug into the 12V
vehicle power socket correctly.
There is no voltage at
the 12V vehicle power
socket.
In many vehicles, the ignition
must be turned on for the 12V
vehicle power socket to be live.
The ignition is
switched on but
the heated seat
pad does not
work.
The 12V electrical pow-
er socket fitting is dirty.
The contact is therefore
interrupted
Clean the 12V vehicle power
socket properly.
The fuse of the 12V
plug has blown.
Replace the fuse of the 12V
plug, see section Maintenance.
The vehicle fuse has
blown
Replace the vehicle fuse for
the 12V vehicle power connec-
tor. Please refer to the hand-
book for your vehicle.
9. Technical data
External material:
Polyester
Internal material:
Polyurethane foam and EVA
Temperature:
max. 50°C
Power rating:
max. 24W
Power supply:
12V
Protection class:
III
Model designation:
16773 Carbon
This heated seat pad has been tested by TÜV-TÜV Rheinland Group (TÜV
Kraftfahrt GmbH. Institute for Traffic Safety, Type testing vehicles/vehicle
parts, Am Grauen Stein, 51105 Cologne).
Suitability for side airbags rated and tested in comparison with series pro-
duction. See application range (type list) and technical report no. 83SG0170.
Retrieve under
www.walsergroup.com/clix
10. Declaration of Conformity
The EU declaration of conformity can be requested from the
manufacturer.
11. Disposal
11.1 Disposal of packaging
Dispose of the packaging separated by type. Put paper board and
cardboard in paper recycling, and plastic films in material recy-
cling.
11.2 Disposal of old appliances
(Applicable in the European Union and other European countries with sys-
tems for separate collection of recyclables)