Product Manual CWC-LOK-LID
Wallgate
2019
8
|Revision 5.0
5.
Installation and Commissioning
5.1
Package Contents
Before you begin the installation, make sure that you have the following items:
✓
1 Product Manual.
✓
1 Lockable Lid assembly, Model No. CWC-LOK-LID.
✓
6 Metre Length of Hygiene sleeve (for 10 replacements of 600mm each).
✓
1 plastic bag containing 10 bands (Cable ties).
✓
*
Torque Wrench & 6mm A/F bit capable of measuring up to 14Nm torque.
*
NOTE: Accessory: Torque Wrench Kit, part no. DL7543 may be supplied. This item is
ordered separately, contact the Wallgate sales desk for more information.
5.2
Lockable Lid Preparation
5.2.1
Pre-installation guidelines
WARNING! When handling the Lockable Lid assembly it is advisable to practice good
hygiene & infection control & suitable PPE should be used.
1.
Prior to fitting
Lockable Lid assembly to the WC ,the ‘J’ bolt protruding below the L
id
must be unlocked to its fullest out end stop position. By fully unscrewing the captive
bolt CCW.
2.
A
60cm length of hygiene sleeve must be fully fitted & secured over the ‘J’ bolt in
accordance with instructions Figs 1 & 2.
