Product Manual CWC-LOK-LID
Wallgate
2019
12
|Revision 5.0
6.2.1
Sleeve replacement & Stowage of Lid, guidelines
WARNING! When handling the Lockable Lid assembly it is advisable to practice good
hygiene & infection control & suitable PPE should be used.
1 Prior to stowage of Lockable Lid assembly, w
ith the Lid resting face down & ‘J’ bolt
protruding above the Lid in its fully extended out end stop position. Cut the Hygiene
Sleeve retaining band & dispose of, allowing nested portion of Sleeve to be free.
Remove the Sleeve
from the ‘J’ bolt
& dispose of. Fig. 7.
2.
Whether stowing the Lid assembly with or without fitting a new Sleeve. It is
advisable to clean the complete unit with a proprietary disinfectant. To fit a new
Sleeve, squarely cut a 60cm length of Hygiene Sleeve, feed approx. 30cm of the
Sleeve over the ‘J’ bolt
.
The remainder of sleeve folded back & nested into hook of ‘J’
bolt & secured with a new band, see Figs.1 & 2.
To prevent edge of lid & ‘J’ bolt
damage, stow the clean Lid assembly face down onto a non abrasive surface w
ith ‘J’
bolt fully extended out & preferably installed with new Hygiene Sleeve ready for
next use.
Figure 7
Replacement of
Hygiene Sleeve &
stowage of unit:
