Wallenstein WX520L, Руководство оператора

Страница: 30 / 84

Operating Instructions
WX520, WX520L, WX520T
Trailer Wood Splitter
30
6.13.2 Prepare for Transport
•
Turn the fuel OFF when transporting.
00278
Fig. 26 – Fuel Valve OFF
•
Clean all debris from the splitter that could fall off in
transport.
• Check tire pressure. Inspect for cuts or damaged
rims.
• Check lug nuts and re-torque as necessary.
Inspect again after 20–25 mi (32–40 km). Check
weekly. See page 39.
• Inspect and replace any axle dust caps that are
missing, damaged or leaking.
•
Always be in compliance with all applicable local
regulations when transporting.
6.13.3 Connecting a Tow Vehicle
1. Keep bystanders are clear of the machine.
2. Make sure there is enough room and clearance to
safely back up to the machine.
3. Slowly back the tow vehicle until the coupler on the
hitch and ball are aligned.
00715
Fig. 27 – Ball Hitch Aligned
4. Lift the hitch and place the coupler over the ball on
the hitch.
5.
Flip the latch to lock the coupler around the ball.
6. Pull out the jack stand snap lock pin and raise the
jack stand to its stowed position. Install snap lock pin
to secure it.
7. Cross safety chains under trailer tongue and attach
securely to the tow vehicle hitch.
8. Connect the wiring harness for the lights (as
equipped).
9. Reverse the above procedure when unhooking.