. CONTROLS
Before starting to work, all operators should famil-
iarize themselves with the location and function of
controls.
. Engine:
Read the engine manufacturers operator's
manual before starting for more detailed
instructions.
a.
Ignition Switch:
This key operated switch controls the
electric power to the engine.
OFF
- Turn key fully counterclockwise to
stop the electrical system power
and turn the engine off.
RUN
- Turn clockwise on detent to the
run position. This is the position
where the engine will continue to
run.
START
- Turn fully clockwise to the last
spring-loaded detent position to
engage the starter solenoid and
start the engine. Release the
key when the engine starts and
it will return to the RUN position.
b.
Choke:
This push/pull knob controls the position
of the choke. Pull the knob out to close
the choke for starting when the engine is
cold. Push the knob in to open the
choke as the engine warms. Always
push the knob fully in when operating
the machine.
c.
Fuel Shut-Off Valve:
This valve controls the flow of fuel to the
engine. Turn the valve at right angles to
the fuel line to turn the fuel off and
parallel to turn the fuel on.
Fig. ENGINE (typical)
HUF2000EA
HUF2000E
Engine
