Wallenstein HUF12000E Скачать руководство пользователя страница 10

Страница: 10 / 37

REMEMBER - If safety signs have been damaged, removed, become illegible or parts replaced without

safety signs, new signs must be applied. New safety signs are available from your authorized dealer.

3 SAFETY SIGN LOCATIONS

The types of safety signs and locations on the equipment are shown in the illustrations that follow. Good

safety requires that you familiarize yourself with the various safety signs, the type of warning and the

area, or particular function related to that area, that requires your SAFETY AWARENESS.

• Think SAFETY! Work SAFELY!

• Read and understand operator's manual

before starting. Review safety instruc-

tions annually.

• Stop and disable engine, remove ignition

key and place in your pocket and wait for all moving parts

to stop before servicing, adjusting or repairing.

• To prevent electrical shocks, do not operate this genera-

tor in the rain or with wet hands. It should be grounded

in damp or highly conductive conditions.

• Close and secure all guards, deflectors and shields

before starting and operating.

• Do not connect the generator to a commercial power

line.

• Do not operate with damaged or defective extension

cords, or power cords. Never operate any electrical

equipment with damaged or defective cords.

• Do not operate this generator in areas with poor ventila-

tion. The exhaust fumes contain carbon monoxide, a

poisonous, odorless, invisible gas. Prolonged exposure

can lead to unconsciousness and death.

• Do not refuel the engine while it is in operation or still hot.

Do not refuel the engine near open flames, pilot lights or

sparking electrical devices (e.g. power tools, welders or

grinders). Do not operate the generator near flammable

products.

• The engine should be refuelled in a well-lit area. Avoid

fuel spillage.

• Never allow children or unauthorized people to operate

or be around this machine.

• Keep the working area clean and free of debris to prevent

tripping. Operate only on level ground.

• Do not cover the generator while in operation. Overheat-

ing can result in damaged equipment.

• For storage, do not cover the generator until it has cooled

down completely.

• The ambient temperature should not exceed 00° F/0° C.

HUF2000E

HUF2000EA

Содержание HUF12000E






































Результаты поиска

Содержание HUF12000E

Отзывы:

Похожие инструкции для HUF12000E

Бренды по названию

Популярные бренды

Wallenstein HUF12000E, Руководство пользователя

Результаты поиска

Содержание HUF12000E

Отзывы:

Похожие инструкции для HUF12000E

Бренды по названию

Популярные бренды