Wallenstein BXT52S Скачать руководство пользователя

Страница: 44 / 76

7.5 Trailer Jack

WARNING!

Do not pull the pin out of a trailer jack when there

is weight on the jack. The machine can move

unexpectedly and cause minor to severe injuries.

Attach the machine to a tow vehicle or put blocks

under the trailer tongue to hold the weight before

you remove the pin from a trailer jack.

W122

The trailer jack has two functions. It supports the machine when
it is not attached to a tow vehicle or helps to keep the machine
stable when it is attached to a tow vehicle.

7.5.1 Lower the Trailer Jack

Pull the pin out of the bracket.

Turn the trailer jack to the vertical position.

Insert the pin through the bracket to hold the trailer jack in
the vertical position.

Turn the handle clockwise to lower the base.

01782

Figure 30 –

Trailer jack in the lowered position

7.5.2 Stow the Trailer Jack

Support the machine to remove weight from the trailer jack.
Attach the machine to a tow vehicle or support the trailer
tongue with blocks.

Turn the handle counterclockwise to retract the base.

Pull the pin out of the bracket.

Turn the trailer jack to the horizontal position.

Insert the pin through the bracket to hold the trailer jack in
the horizontal position.

01782

Figure 31 –

Trailer jack in the stowed position

Transport

BXT52S

Wood Chipper

Содержание BXT52S













































































Результаты поиска

Содержание BXT52S

Отзывы:

Похожие инструкции для BXT52S

Бренды по названию

Популярные бренды

Wallenstein BXT52S, Руководство оператора

Результаты поиска

Содержание BXT52S

Отзывы:

Похожие инструкции для BXT52S

Бренды по названию

Популярные бренды