42
7�3�5 CHOPBLOCK:
The ChopBlock is an assembly of breaker tabs bolted in at the bottom of the upper rotor housing. The
shredder knives pass through the chop block, and helps to break the material into smaller pieces and
turn it into mulch. Inspect the chop block for damage such as gouges, bent, or missing teeth. A damaged
chop block should be replaced. If it teeth are showing wear, remove and rotate the chop block.
1.
Disengage the PTO, stop the engine,
remove the ignition key and place it in your
pocket and wait for all moving parts to stop
2.
Remove the 6 bolts that hold the chop block
to the housing, remove the chop block.
3.
Rotate and install, or install a new chop
block.
4.
Replace the chop block bolts.
5.
Close and secure the upper rotor housing.
Chop Block
Bolts
Chop Block
Machine is shown with guard removed
for illustrative purposes only. Do not
operate machine with guard removed.
Fig� 27 CHOP BLOCK
WARNING
