Wallenstein BX52S Скачать руководство пользователя страница 6

Страница: 6 / 50

1 INTRODUCTION

Congratulations on your choice of a Wallenstein BX series 3 Point Hitch Wood Chipper to compliment your

operation. This equipment has been designed and manufactured to meet the needs of a discerning timber

or landscaping industry.

Safe, efficient and trouble free operation of your Wallenstein Wood Chipper requires that you and anyone

else who will be using or maintaining the chipper, read and understand the Safety, Operation, Maintenance

and Trouble Shooting information contained within the Operator's Manual.

This manual covers all variations of the Wallenstein 3 Point Hitch Wood Chipper BX series. Your particular

model may vary from the illustrations shown depending on your options package.

Use the Table of Contents or Index as a guide to locate required information.

Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your

Wallenstein dealer or the Distributor if you need assistance, information or additional copies of the manuals.

OPERATOR ORIENTATION

- The directions left, right, front and rear, as mentioned throughout this manual,

are determined when sitting in the tractor driver's seat and facing in the direction of travel.

Model:

BX52S

This manual covers

models:

BX32S
BX52S
BX72S
BX102S

Содержание BX52S



















































Результаты поиска

Содержание BX52S

Отзывы:

Бренды по названию

Популярные бренды

Wallenstein BX52S, Руководство оператора

Результаты поиска

Содержание BX52S

Отзывы:

Бренды по названию

Популярные бренды