Wallenstein BX52RI, Руководство оператора

Страница: 50 / 72

Operating Instructions
BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
50
6.9 Storage
After the season's use or when the machine is not going to be
used for a period of time, place the chipper in storage.
Safety Rules
• Store the unit in an area away from human activity.
• Do not permit children to play on or around the stored
machine.
• Store the unit in a dry, level area. Support the frame with
wood blocking as required.
Placing Chipper in Storage
1. Completely inspect all major systems. Replace or repair any
worn or damaged components to prevent any unnecessary
down time at the beginning of the next season.
2. Inspect all rotating parts and remove entangled material.
3. Thoroughly wash the machine with a pressure washer or
water hose to remove all dirt, mud or debris.
4. Run the machine a few minutes to dry the moisture from
inside the machine.
5. Move the roller feed control bar to the forward STOP
position so it clears the cowling when the feed table is
folded up.
6. Carefully grasp the front edge of the feed table and fold it up
to its vertical position. Secure it by engaging the two spring
loaded latch pins into the pin tabs.
00861
Fig. 65 –
Storage Position
7. Turn the discharge chute inward.
8. Touch up all paint nicks and scratches to prevent rusting.
9. Store the machine inside. If that is not possible, cover with
a waterproof tarp. Remove the PTO shaft.
10. Store in an area away from human activity.
Removing from Storage
When taking the machine out of storage, review the
Pre-operation Checks before putting the machine back into
service. See page 42.