Wallenstein BX52RI, Руководство оператора

Страница: 44 / 72

Operating Instructions
BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
44
6.4 Chipping Operation
Chipper Capacity
Model Series Material Size
BX52R 5" (13 cm)
BX72R 7" (18 cm)
BX102R 10" (25 cm)
1. Engage the PTO. Set tractor at half throttle. Make sure the
rotor is up to speed before beginning.
2. Move the control bar out of the STOP position. Lift up the
detent reset lever to release it.
00816
Fig. 54 –
Detent Reset Lever
NOTE: Feed rollers function in Reverse even at engine
idle so material can be backed out.
3. Push the control bar forward to the first detent position to
start the forward feed. The control bar stays in this position
until moved.
00819
Fig. 55 –
Forward (Feed)
NOTE:
The control bar can move freely between Forward
and Reverse without locking.
Reversing the feed rollers can be manually
controlled with the feed control handle at any time,
even at engine idle. The rotor does not have to be
turning for Reverse to work.
4. Stand to the side of the feed table and slowly slide material
into the feed rollers. Do not force the material. The material
is drawn in as it engages the rollers.
00851
Fig. 56 –
Stand to Side of Feed Table