Wallenstein BX36S Скачать руководство пользователя страница 8

Страница: 8 / 52

Safety

BX36S

3PH Self-feed Chipper

6. Safety

6.1 Safety Alert Symbol

This Safety Alert Symbol means:

ATTENTION! BE ALERT!
YOUR SAFETY IS INVOLVED!

6.2 Why is SAFETY important?

Three Big Reasons:

•

Accidents Disable and Kill

•

Accidents Cost

•

Accidents Can Be Avoided

6.3 Signal Words

The signal words

DANGER

WARNING

and

CAUTION

determine the seriousness level of the warning

messages in this manual. The appropriate signal word

for each message in this manual has been selected

using the following guidelines:

DANGER –

Indicates an imminently hazardous situation that, if

not avoided,

WILL

result in death or serious injury.

This signal word is to be limited to the most extreme

situations typically for machine components which, for

functional purposes, cannot be guarded.

WARNING –

Indicates a potentially hazardous situation that, if not

avoided,

COULD

result in death or serious injury, and

includes hazards that are exposed when guards are

removed. It may also be used to alert against unsafe

practices.

CAUTION –

Indicates a potentially hazardous situation that, if not

avoided,

MAY

result in minor or moderate injury. It may

also be used to alert against unsafe practices.

IMPORTANT

– To avoid confusing equipment

protection with personal safety messages, a signal

word IMPORTANT indicates a situation that if not

avoided, could result in damage to the machine.

NOTE: (plus text) – indicates an additional

explanation for an element of information.

The

Safety Alert Symbol

identifies important

safety messages on the Wallenstein Wood

Processor and in the manual. When

you see this symbol, be alert to the

possibility of personal injury or death.

Follow the instructions in the safety

message.

Содержание BX36S





















































Результаты поиска

Содержание BX36S

Отзывы:

Бренды по названию

Популярные бренды

Wallenstein BX36S, Руководство по эксплуатации

Результаты поиска

Содержание BX36S

Отзывы:

Бренды по названию

Популярные бренды