Wallenstein BX36S, Руководство по эксплуатации

Страница: 32 / 52

Storage
BX36S
3PH Self-feed Chipper
32
• Store the unit in an area away from human
activity.
• Do not permit children to play on or around
the stored machine
• Store the unit in a dry, level area. Support the
frame with planks if required.
14. Storage
STORAGE SAFETY
After the season's use or when the machine is not
going to be used for a period of time, place the chipper
in storage.
• Completely inspect all major systems.
• Replace or repair any worn or damaged
components to prevent any unnecessary down
time at the beginning of the next season.
14.1 Placing Chipper in Storage
1. Power Pack Accessory: review the engine owners
manual concerning storage and prepare the engine
for storage.
2. Remove all material from the machine.
3. Thoroughly wash the machine with a pressure
washer or water hose to remove all dirt, mud or
debris.
4.
Inspect all rotating parts for entangled material.
Remove all entangled material.
5. Run the machine a few minutes to dry the moisture
from inside the machine.
6. Move the feed hopper up and lock.
7.
Turn chute inward.
8. Touch up all paint nicks and scratches to prevent
rusting.
9. It is best to store the machine inside. If that is not
possible, cover with a waterproof tarpaulin and tie
down securely.
10.
Store in an area away from human activity.
11. Do not allow children to play around the stored
unit.
NOTE: When lowering the feed hopper, be aware
of the pinch point between the hopper and
the sub chute.
Z94242
14.2 Removing from Storage
When removing this machine from storage, follow this
procedure:
1. Remove the tarpaulin if covered.
2.
Review and follow the Pre-operation Checklist.
(See page 28 ).
Feed Hopper
Stored
Chute Turned
Inward
Fig. 21 – Feed hopper stored