Operating Instructions
BX52R, BX72R, BX102R
Tractor Wood Chipper
46
7.3 Before Startup
1.
Check the hydraulic oil level in the tractor.
2.
Review Operating Safety Rules.
3.
Clear the area of all bystanders, especially children.
4.
Make sure each operator is trained and familiar with the set
up and operation of the wood chipper.
5.
Perform the Pre-start Checks
.
6.
.
7.
Place the chipper in a clear, level work area close to the
material at the work site. Material can then be loaded
straight into the feed table with limited handling.
8.
Set the tractor brake and block or chock the wheels.
9.
Lower the chipper so the machine is resting on the ground.
Make sure machine is level and stable.
IMPORTANT! The chipper must be resting on the ground
during operation. Operating the chipper while raised off the
ground is dangerous and results in damage to the machine.
10.
Release the two spring loaded latch pins from the feed table
pin tabs and lower the feed table.
00829
Fig. 53 –
Feed Table in Stowed Position
11.
With the feed table in position, engage the spring-loaded
table lock pins to secure the table.
00837
Fig. 54 –
Table Lock Pins
12.
Turn the discharge chute to the desired position and adjust
the deflector as required.
00811
Fig. 55 –
Discharge Chute
