Wallenstein 720123, Руководство оператора

Страница: 26 / 44

Operating Instructions
WXR720/L, WXR740/L
Trailer Wood Splitter
26
2. Install fuel fill cap securely and wipe up any spilled
fuel.
6.8 Engine Air Cleaner
A dirty air filter can restrict air flow to the carburetor,
reducing engine performance. If the engine is operated
in very dusty areas, clean the air filter more often than
specified
.
IMPORTANT! Operating the engine without an air
filter, or with a damaged air filter, can allow dirt to
enter the engine, causing rapid engine wear. This
type of damage is not covered by Warranty.
Inspection
Remove the air cleaner cover and inspect the filter
elements. Clean or replace dirty filter elements. Always
replace damaged filter elements.
NOTE: Refer to the engine manual for further
information on servicing the air cleaner.
00202
Fig. 15 – Engine Air Cleaner
6.9 Machine Set-up
IMPORTANT! Park the wood splitter on a level,
dry work area free of debris and other objects.
Position the splitter so the prevailing wind blows
engine exhaust away from the operator.
NOTE: If using a tow vehicle, leaving the splitter
attached to it provides greater stability.
6.9.1 WXR720, WXR720L
00200
1 2
Fig. 16 – WXR720, WXR720L Set-up
1. Jack Stand, Snap Lock Pin
2. Jack Stand
1. Position the splitter next to the wood to be split.
2. If no tow vehicle is available, lower the jack stand
and chock the wheels so the machine is stable.
3. Make sure working area is clear of stones,
branches or other obstacles.
4. Precut logs to desired block size, ready to load
onto splitter bed.
5.
Determine where the split wood is going to be
piled. Make sure that location does not interfere
loading splitter.