background image

Controls 

WXR720/L, WXR740/L

Trailer Wood Splitter

20

5.  Controls 

IMPORTANT!  Before starting work with the wood 

splitter, become familiar with the location and 

function of all controls.

5.1  Engine Controls

Refer to the engine manual that came with this product 

for further explanation on engine controls.

00189

2

3

1

5

4

Fig.  5 – 

Engine Controls

1.  Throttle Lever

2. 

Ignition Switch

3. 

Oil Level Check

4. 

Oil Drain Plug

5.  Starting Rope

6.  Fuel Valve Lever

7.  Choke Lever

5.1.1  Ignition Switch

This rotary switch controls the ignition system. 

• 

The engine operates in the ON position. Before 

starting the engine, turn the switch to ON. 

• 

Turn it counter-clockwise to OFF to stop the 

engine.

00187

Fig.  6 – 

Ignition Switch

5.1.2  Choke Lever

The choke lever opens and closes the choke valve in 

the carburetor.

• 

Place the choke lever in the CLOSED position (3) 

when starting a cold engine. 

• 

Move the choke lever to the OPEN position (2) 

after the engine starts. When restarting a warm 

engine, leave the lever in the OPEN position.

00188

1

2

3

Fig.  7 – 

Choke Lever

1.  Choke Lever

2. 

Choke Open Position

3.  Choke Closed Position

5.1.3 

Fuel Shut-off Valve 

The engine is equipped with a valve between the fuel 

tank and the carburetor. 

• 

Slide the fuel valve lever toward the block (2) to 

turn fuel ON, and away (3) to turn OFF. 

• 

Turn the fuel OFF when not in use or when 

transporting.

00190

2

1

3

Fig.  8 – 

Fuel Valve Lever

1. 

Fuel Shut-off Valve Lever

2. 

ON Position

3. 

OFF Position

Содержание 720123













































Отзывы: