6
www.WalkinPets.com
length
height
width
Quick Start Guide
Your Walkin’ Wheels MINI box contains everything you need to get
your pet rolling.
1. Take wheelchair out of box. Front harness red strap will be on
the bottom and blue strap on the top. Release the two clips so
they hang down, keeping it attached to the wheelchair.
2. Releasing the wheels on knuckle. Turn the knob on the knuckle
counter clockwise 5 turns to loosen it up. Move the strut
perpendicular to the wheelchair frame
with the
red
harness
strap on bottom
. Adjust the height according to your fold of
fl ank measurement (see p.8).
3. Length: While the knob is still loose, adjust the length to your
dog's armpit to rump measurement (see p.7).
4. Knuckle Adjustment: Tighten the round black knuckle so the
teeth are engaged tightly.
5. Leg Rings: Attach all four wires around the frame to form a seat.
The wires should be wrapped on each side of knuckle tightly. If
you push the piece in the middle, it should hang down 1-2" to
form a cradle (see p.8).
6. Width: Unscrew the knobs in back and adjust to your dog's
widest area, which is usually the chest width (see p.7).
7. Stirrups: Attach stirrups around the two black knobs in the rear.
Secure the top part around the knobs, and adjust the length of
the stirrups (see p.9).
8. Ready to start rollin: See p.10 to get your pet in the wheelchair.
Watch this:
www.WalkinPets.com/mini-dog-wheelchair-instructional-videos
