SUGGESTED BEST PRACTICE
Select, measure and adjust walker to patient.
16 16
STEP 1:
MEASURE FROM
WRIST TO FLOOR.
STEP 2:
WALKER IS
ADJUSTED TO
MEASUREMENT
FROM STEP 1
Follow the manufacturer’s suggested procedures to fit each
style of walker.
SWITCH SET-UP
➊
Slide Cover open by
lightly pressing down and
forward on the rear of the
cover. If needed, gently lift
front with fingernail.
➋
To get the feel of the Dip
switches, move a switch
up or down with a tip of a
ball point pen, feel when
the switch engages into
the up or down position.
1 Vibrate On/Off
2 Beep Alarm On/Off
3 Color Glow On/Off
4 Distance Code Switch
5 Distance Code Switch
6 Distance Code Switch
7 Sleep Mode On/Off
8 Diagnostic Mode On/Off
ONLY FOR USE BY Administrators or Caregivers
For Proper Walker Alarm Setup and Working Conditions
WALKER ALARM, LLC WARRANTY DIRECTIVE
Switch Position
Top View Lid Removed
24
UP
DOWN
1
Up
Down
2 3 4 5 6 7 8
9
3
➌
Leave switches 7& 8 in the down position to maintain
factory settings.
SENORS
