TROUBLESHOOTING
Computer-based system alerts:
Incorrect Switch Position
If here is a continuous FLASHING RED LIGHT when turning on
the Walker Alarm, turn it off, check the switch 4, 5 or 6 settings
and turn it back on.
When first turned on if the LED, vibrator, or buzzer doesn’t
work, turn the Walker Alarm off, check switches 1, 2, or 3
settings and turn it back on.
Incorrect Distance Reading
If a PURPLE LIGHT IS SEEN, IT IS DUE TO AN INCORRECT
DISTANCE READING. Turn the Walker Alarm off and back on
again, resetting the computer, correcting the error.
WARNING
• This is a
COMPUTER BASED ELECTRONIC DEVICE
.
Keep away from Water!
• DO NOT DROP OR JOLT!
• Operating Temperature 0°-70°C, 32°-158°F
• Always follow Walker Alarm instructions for operation.
SAFETY DEVICE |
REMEMBER – IMPORTANT
THIS IS A SAFETY DEVICE WITH A HIGH-END, ELECTRONIC,
SHORT DISTANT RADAR TRACKER; TO KEEP YOU IN A SAFE
AREA WHEN WALKING WITH A WALKER. TAKE PROPER CARE
OF THE WALKER ALARM.
Toll Free:
(844) 253-7624
Direct:
(630) 728-1973
Email:
REPAIR DEPOT:
Ellutions, LLC
c/o Walker Aid, LLC
1701 West Flintlock Way
Chandler, AZ 85286
EIN# Request As Needed
Certificate of Registration
Illinois: 4129-1328
Arizona B-2004167-8
Walker Aid, LLC, is owned by
William G. Trout.
©2016 All right reserved.
Owner of U.S. Patents:
7963294 and 8453662
11
