Walker WP32MP4, Руководство по эксплуатации

Страница: 37 / 52

English - 36 -
Using the “ ” or “ ” buttons, you can switch to
PIP, PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and
the following settings will appear on the same
menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use the
“ ” or “ ” buttons to switch the TV to
Pip , Pap
or Off .
Pip Size
Using this setting, you can set the size of the Pip
window. Press the “ ” or “ ” buttons to highlight
Pip Size item. Use the “ ” or “ ” buttons to set
Pip Size to Small or Large.
Note : This setting will be inactive if the TV is set to
Pap mode.
PIP Position
This setting is used for moving the sub
picture.
Select PIP Position item by using the “ ” or
“ ” buttons. Use the “ ” or “ ” buttons to adjust
PIP position.
Positions available are: Bottom Right,Bottom
Left, Top Left and Top Right.
Source
PIP Source setting enables you to select the
source of the sub picture.
Select PIP Source item by using the “ ” or
“ ” buttons. Use the “ ” or “ ” buttons to set
PIP source .
Program
This setting will be unavailable to be used.
Swap
Select Swap item by using the “ ” or “ ”
buttons. Use the “ ” or “ ” buttons to set. This
function enables to swap between the main and
the PIP picture.
Note : See Appendix E for all PIP/PAP modes.
Sleep Timer
Press the “ ” or “ ” buttons to select Sleep
Timer . Use the “ ” or “ ” buttons to set the
Sleep Timer .
The timer can be programmed between Off and
120 minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press the “ ” or “ ” buttons to select Child
Lock .
Use the “ ” or “ ” to turn the Child Lock On
or Off . When On is selected, the TV can only
be controlled by the remote control handset. In
this case the control panel buttons (except the
STANDBY button) will not work.
Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.
Language
Press the “ ” or “ ” buttons to select Language .
Use the “ ” or “ ” buttons to to select the
Language .
Default Zoom
While zoom mode is set as AUTO , the TV will set
the zoom mode in accordance with the signal
of the broadcast. If there is no WSS or aspect
ratio information, the TV will then use this setting
to adopt. Press the “ ” or “ ” buttons to select
Default Zoom . You can set Default Zoom to
Panoramic , 16:9 , 4:3 or 14:9 by pressing the
“ ” or “ ” buttons.
Note :
The
Default Zoom feature will not be available
while in Digital Tv mode.
Blue Background
If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set
Blue Background to On .
[GB]_MB36_HDIDTV_MPEG4_BRONZE8_32880W_1205UK_10063234_50151599.indd 36 29.07.2009 16:03:18