Walker WP32MP4, Руководство по эксплуатации

Страница: 32 / 52

English - 31 -
Note: Country selection will not be available for UK.
Press OK to continue.
After the country (for EU countries) is selected,
a message asking for automatic search appears
on the screen:
Highlight the “ Yes ” item by pressing the “ ” or
“ ” buttons and press the OK button to start
installation. After search is completed for digital
channels, a message asking whether to search
for analogue channels appears on the screen:
Highlight the “ Yes ” item by pressing the “ ” or
“ ” buttons and press the OK button to search
for analogue channels. The following menu
appears on the screen for analogue channel
search:
Set the Language item by pressing the “ ” or
“ ” buttons. Press the “ ” or “ ” buttons to
highlight the
Country item and then use “
” or “ ” to set. Press the “ ” or “ ” buttons to
highlight the TXT Language. Select a region by
using the “ ” or “ ” buttons. When
 nished,
press the OK or RED button to continue. To
cancel, press the BLUE button.
After APS is  nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them
via
Program Table . See section “ Program
Table ”.
Media Browser (in DTV mode)
Whenever you pluged a USB  ash disk to your
TV, the following message will be displayed on
the screen:
You can also select Media Browser item from
the main Menu by using the “ ” or “ ” buttons.
Press
OK to view Media Browser contents.
You can play audio and photo  les from a USB
 ash disk.
Note: Some USB compliant devices may not be
supported.
Note: Movie Sense and Pixellence features cannot
be set while in Media Browser mode.
[GB]_MB36_HDIDTV_MPEG4_BRONZE8_32880W_1205UK_10063234_50151599.indd 31 29.07.2009 16:03:14