Operating Instructions
H37i
32
Roll-Over Protection System (ROPS,
Optional)
WARNING
The ROPS may offer enhanced operator
protection in the event of a roll-over type
accident, but only if used correctly. Failure
to comply with the following ROPS
instructions can result in serious injury or
death if a roll-over occurs. Read and
understand the following ROPS instruc-
tions before operating the machine.
● Keep the ROPS roll bar in the upright and
locked position when operating the machine.
o
Always use the seat belt when the ROPS
roll bar is in the upright position.
o
Make sure that the seat belt can be
released quickly in the event of an
emergency.
o
Make sure that the mower body hold-down
latch is engaged.
● Lower the ROPS roll bar only when absolutely
necessary for overhead clearance reasons.
o
Never use the seat belt if the ROPS roll
bar is not in the fully upright and locked
position.
o
Never lower the ROPS roll bar when
operating in areas where there are slopes,
drop offs, or other roll-over hazards.
o
Be aware there is no roll-over protection
when the roll bar is lowered.
o
Raise and lock the ROPS roll bar as soon
as overhead clearance permits.
● Check for overhead clearance (e.g., branches,
doorways, electrical wires) before driving
under any objects and be careful to avoid
contact.
To Lower the ROPS Roll Bar:
1. Loosen the two (2) tension knobs.
2. Remove the two (2) hitch pins.
3. Remove the two (2) locking pins.
4. Lower the roll bar.
5. Replace the locking pins and secure them with
the hitch pins.
To Raise and Lock the ROPS Roll Bar:
1. Remove the two (2) hitch pins.
2. Remove the two (2) locking pins.
3. Raise the roll bar to the upright position.
4. Install the two (2) locking pins and secure
them with the two (2) hitch pins.
5. Tighten the two (2) tension knobs to prevent
the roll bar from rattling.
Locking
Pin
Locking
Pin
Hitch
Pins
Tension
Knobs
Roll-Over Protection System (ROPS)
