Walker C19i, Руководство оператора

Страница: 52 / 84

Maintenance Instructions
48
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - MODEL C19i
Service Item
Daily
25
Hours
100
Hours
200
Hours
400
Hours Yearly
Every
2 Years
Ref.
Page
Check Engine Crankcase Oil Level x 50
Check/Clean Engine Air Cooling System* x 59
Check Security of Air Filtration Components x 62
Check Air Filter Restriction Gauge x 57
Clean Grass Buildup Under Deck x 60
Clean GHS Exhaust Screen* x 62
Clean GHS Blower* x 61
Service Mower Blades x 64
Check Function of Oil Pressure Warning Horn x 26
Lubricate Grease Fittings and Oil Points* x 53
Check PTO Gearbox Oil Level** x 53
Check Battery Electrolyte Level x 63
Check Hydrostatic Transmission Fluid
◊
x 56
Check Tire Pressure x 63
Check Drive Belts (Jackshaft, Engine PTO,
GHS Blower, Ground Drive)
x 65
Check Deck Gearbox Oil Seals x 65
Check Safety Switch System x 66
Check Turbine Precleaner* x 57
Check Air Filter Element *** x 58
Change Engine Crankcase Oil
Δ
x 51
Check Oil Level in Gear Axle x 53
Clean Hydrostatic Transmission Cooling Fins x 62
Clean Engine Cooling Fins x 60
Check Blade Brake Action x x 66
Check Wheel Bolt Torque (75 to 85 lb
·
ft )
x 63
Check/Regap Spark Plugs x 65
Change Engine Oil Filter x 51
Replace Air Filter Element,
and Dust Ejection Valve ***
x 58
Check Fuel Lines and Clamps x 65
Replace Fuel Filter x 72
Service Battery x 62
Check FSC Friction Lock x 66
Service Solenoid Shift Starter x 65
Check Engine Valve Clearance x
ΔΔΔ
Remove Engine Shroud and Clean Cylinder
Head Cooling Fins
x 60
Change Gear Axle Oil
ΔΔ
x 53
Replace Fuel Lines and Clamps x 65
Change Hydrostatic Transmission Fluid
ΔΔ
x
ΔΔΔ
Replace Ignition Wires x 65
∗
More often in extremely dusty or dirty conditions
∗∗ Change PTO gearbox oil after first 100 hours of operation (break-in period)
∗∗∗
Air cleaner is remote mounted Enginaire™ unit,
replace filter(s) every 400 hours and dust ejection
valve every two years or when worn or damaged
Δ Change engine oil and filter after first 5 hours of operation of a new engine (break-in period)
ΔΔ
Change every 2 years or 1000 hours
ΔΔΔ
See your Walker dealer for this service or refer to the Walker Service Manual
◊
Hydrostatic transmissions are sealed - DO NOT OPEN RESERVOIR CAPS - refer to
Checking Hydrostatic Transmission Fluid Level in this section
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.