Walker C19i, Руководство оператора

Страница: 31 / 84

Operating Instructions
27
CONTROL IDENTIFICATION, LOCATION, AND
FUNCTION
CAUTION
Before operating the mower, become famil-
iar with the location and function of all op-
erator controls. Knowing the location,
function, and operation of these controls is
important for safe and efficient operation
of the mower.
Ignition Switch
The ignition switch is located on the left front of the
body and is used to start and stop the engine. The
switch has three positions: “O” is the
OFF position,
ON (RUN) is the position the key returns to after
starting, and “S” is the START position. When start-
ing the engine, turn the key clockwise to the “S”
position. Do not hold the key in the “S” position
longer than 10 seconds. If the engine does not start,
return the key to the “O” position for at least 60 sec-
onds before making a restart attempt. Prolonged
cranking can damage the starter motor and shorten
battery life. Release the key when the engine starts,
and it will return to the
ON (RUN) position. To stop
the engine, rotate the key counterclockwise to the
“O” position.
Operating Controls
OFF
START
ON
Ignition Switch
Key Positions
Throttle
Steering
Levers
Forward Speed
Control (FSC)
Front Body Latch
Release (Not Visible)
Parking
Brake
Blade Clutch
(PTO)
Engine Service
Light
Oil Pressure
Warning Horn
Ignition Switch
(See Inset)
Hourmeter
7 Amp
Circuit Breaker
Light Switch
(Optional, Not Shown)