Assembly and Installation
14
22. Check operation of the lift release push button
on the top of the lift handle. If additional travel
is needed, loosen the jam nut on the clevis and
rotate the rod until the desired length is
achieved. Re-tighten the jam nut.
Lift Release Push Button
Jam Nut
Adjust Rod Length for Additional Travel
23. Check the adjustment of the angle stop bolts
with the blade in the fully angled position in
both directions. Confirm that the mechanism
engages freely in the angle adjust slot while the
angle stop bolt is contacting the side of the
attachment frame tongue. Adjust as necessary.
Angle
Stop Bolt
Angle Stop Bolts
Locking Tang
Foot Trigger
Locking Tang and Foot Trigger
