Assembly and Installation
15
REMOVING THE DOZER BLADE
1. Use a jack to block up the tractor a few inches
off the ground
Block Up Tractor
2. Remove the drive tires using a 3/4” wrench for
the mounting nuts.
3. Disconnect the 5A Fuse Harness from the main
harness.
Safety
Switch
Harness
Disconnect 5A Fuse Harness
4. Using a jack, lift and secure the blade so it sits
level with the tractor body.
5. Remove the support straps using 1/2” wrench.
Reserve the hardware with the straps for rein-
stallation. Lower the blade to a ground.
Remove Support Strap
6. Using a 5/8” wrench and an 11/16” wrench,
remove the blade mounting hardware, and pull
the blade away from the tractor. Reserve the
hardware with the blade for reinstallation.
Remove the Blade
