background image

Foreword 

Thank you. . .

for purchasing a Walker A44 Dozer Blade Attachment. Every effort has been made to provide you with the 

most reliable mower on the market, and we are sure you will be among our many satisfied customers.  If for any reason 

this product does not perform to your expectations, please contact your local dealer.  Every customer is important to us.  

Your satisfaction is our goal.

Please. . .

 Before you operate your machine, please read this entire manual. Some of the information is crucial for proper 

operation - it will help protect your investment and ensure that the machine performs to your satisfaction. Some of the 

information is important to your safety, and must be read and understood to help prevent possible injury to the operator or 

others. If anything in this manual is confusing or hard to understand, please contact your local authorized dealer or call 

our service department, at (970) 221-5614, for clarification before operating or servicing this machine.

This manual covers the Walker A44 Dozer Blade Attachment.

All shields and guards must be in place for the proper and safe operation of this machine.  

Where they are shown 

removed in this manual, it is for illustration purposes only.

  Do not operate this machine unless all shields and guards 

are in place.

Walker Mfg. Co. is continually striving to improve the design and performance of its products.  We reserve the right to 

make changes in specifications and design without thereby incurring any obligation relative to previously manufactured 

products.

Sincerely,  

WALKER MANUFACTURING COMPANY 

 

Bob Walker, Chairman

Содержание A44





























Отзывы: