36
37
7. Power supply
7.1 Power supply Niova 60 Plus Bi Color – connection to the power adapter
• Switch the device <OFF> with the ON/OFF switch (9) on the device.
• Insert the round plug of the power adapter unit into the socket marked <DC 12-17
V> (12) on
the backside of the lamp.
• Connect the power cable (28) with the power supply unit.
• Connect the power supply unit to the plug of the local power (AC
100 - 220 - 240 V / 50 - 60
Hz).
• Set the power switch (9) to <ON>.
• The device is now ready for mains power operation.
• Switch the lamp off after use.
7.2 Mains power supply Niova 100 / 200 Plus Daylight – connection to the mains power
• Switch the device <OFF> with the ON/OFF switch (9) on the device.
• Insert the power cable into the power socket (12) on the side of the lamp.
• Connect the other end of the power cable to the plug of the local power (AC
100 - 220 - 240 V /
50 - 60
Hz).
• Set the power switch (9) to <ON>.
• The device is now ready for mains power operation.
• Switch the lamp off after use.
8. Operating the device, settings and display signals
8.1 Switching the device on / off on the device
• Connect the power supply as described in the previous section 7
• Switch the device <ON> with the ON/OFF switch (9) on the device.
• The lamp is ready for use.
Display
Status LED orange <C>=
color temperature menu
Status LED blue <D> = dimmer menu
ON/OFF switch
Multifunctional knob
adjustment dimming/co-
lor temperature/channel
selection mode
Power supply socket
Niova 60 Plus:
Status LED illuminations Niova 60 Plus Bi Color:
• Status LED blue (D)= dimming menu
• Status LED orange (C) = color temperature menu
• NO status LED= channel selection menu
Display
Plus button <+>
Menu Button dimming/channel
selection mode
ON/OFF switch
Minus button <
>
Fuse socket
Niova 100 / 200 Plus:
Status illuminations Niova 100 / 200 Plus:
• Displayed values in the display are NOT blinking = dimming mode active
• Displayed values in the display are blinking = channel selection mode active
NOTE
Please follow the user information issued by the stand manufacturer.
WARNING
Only mount the device on a stand that has been designed for the weight and
dimensions of the device.
See technical specifications.
Make sure that the stand with the mounted device is safe against tipping over or slipping.
NOTE
Only connect the power supply unit to an earthed plug.
NOTE
After use, disconnect the device from the local power supply by simply pulling out the mains plug.
NOTE
Compare the local electric power supply with the connection values of the
device. Should the connection values not match, please contact
