38
39
8.3 Adjusting the colour temperature on the device (for bi-colour models only)
• Switch the device on with the ON/OFF switch (26) and select the correct power source (if not
already done).
• The current set colour temperature is shortened shown the third and fourth line in the display
of the lamp (21). For example, 32 means 3,200 Kelvin and 44 means 4,400 Kelvin.
• By pressing the multi-function button / selection dial (25) several times, you can switch bet-
ween adjusting brightness (dimmer function) and colour temperature.
• Select the function for adjusting the colour temperature (status of LED <COLOR> (24) lights
up).
• Turn the multi-function button / selection dial (25) to set the desired colour temperature.
• The colour temperature can be set in steps of 100 Kelvin from 3,200 to 5,600 Kelvin.
• The colour temperature value is adjusted, saved and shown on the display immediately after
turning the selection dial.
8.4 Setting the remote-control channel on the device
• Switch the device on with the ON/OFF switch (26) and select the correct power source (if not
already done).
• As standard, the lamp is pre-set to dimmer function after switching on, and the corresponding
status LED (22) lights up blue.
• Press the button marked <Channel> (18) below the <DIMMER> status light. The selection
switches between dimmer function / brightness adjustment and channel selection.
• If you select the channel function, NO separate status LED will light up.
• The set channel is shown on the display (three digits in the display).
• Turn the multi-function button / selection dial (25) to set the desired channel.
• Channels from 1 to 99 can be selected.
• The value set for the channel selection is set and saved.
• The display then changes automatically back to the standard display for brightness and colour
temperature.
8.2 Setting brightness (dimmer function) on the device
• Switch the device on with the ON/OFF switch (26) and select the correct power source (if not
already done).
• As standard, the lamp is pre-set to dimmer function after switching on, and the corresponding
status LED (22) lights up blue.
• The selected light output is shown as a percentage in the first two lines of the display.
• By pressing the multi-function button / selection dial (25) several times, you can switch bet-
ween adjusting brightness (dimmer function) and colour temperature.
• Select the function for adjusting brightness (status of LED <DIMMER> (22) lights up).
• Turn the multi-function button / selection dial (25) to set the desired brightness.
• The brightness can be adjusted in steps of 1% from 10 to 99%.
• The brightness value is adjusted, saved and shown on the display immediately after turning
the selection dial.
8. Operating and using the device
8.1 Switching the device on / off
• Set the correct power source, as described in section 7 above, and switch on the device.
• The lamp is ready for use.
Brightness in %
DMX / Remote control mode
Multifunction /rotate-push knob
(dialwheel)
ON/OFF switch
Color temperature in Kelvin
Channel selection (1-99)
Channel selection
(1-99)
Power connection
socket round
