49
Manual 23091 LED Niova 100-F Pro 100W Bi Color
4.
Activate the remote control by pressing the on/off button (36).
The remote control goes back to sleep 15 seconds after the
last button press.
5.
Press the selection button (39) repeatedly to jump back and
forth between the operating modes. Change the values with
the plus (37) and minus (38) buttons. There are three modes:
o
Brightness
: The red control LED (40, left) lights up.
The number shown is the brightness of the light in
percent. This ranges from 10 to 99. Change the
brightness with the Plus (37) and Minus (38) keys.
o
Colour temperature
: The orange control LED (40,
centre) lights up. The number shown indicates the
colour temperature in 100K. The adjustable values
range from 32 (3,200 K) to 56 (5,600 K). Select the
colour temperature with the plus (37) and minus (38)
keys.
o
Channel
selection for the remote control: no LED
lights up. The selected channel is displayed. Set the
same channel on the remote control and the luminaire.
Select the channel with the Plus (37) and Minus (38)
keys.
6.
The on/off button (36) can be used to switch the lamp on and
off. Press the button long to switch off and short to switch on.
After switching off, the displays of the remote control and the
lamp show "OF". Switch off the lamp directly on the device
when you have finished your work.
