45
Manual 23091 LED Niova 100-F Pro 100W Bi Color
20
Power Supply
20.1
Power supply by battery
1.
Switch off the device. To do this, move the on/off switch (25)
to the [0 OFF] position.
2.
Insert a sufficiently charged V-mount battery into the battery
dock (12) of the fixture. A distinct click and the snapping out
of the release button (13) signal that it is securely in place.
3.
To switch on, set the on/off switch (25) to the [I BATTERY]
position.
WARNING
Batteries can leak or explode if handled improperly.
Only use batteries that are specified in these operating
instructions, see chapter 25.
Do not place batteries in a fire or expose them to direct heat.
Remove battery if you are not going to use the product for a
longer time or if the battery is discharged.
If battery fluid comes into contact with skin or clothing, rinse
immediately with fresh water.
Do not charge the battery unattended.
Disconnect the charger from the mains as soon as charging is
complete.
Recommendations for the use of rechargeable batteries
Replace the rechargeable battery at the latest when the light of
the lamp starts to flicker.
Before removing the battery, switch off the device using the
appropriate switch.
