PPG Wave 2.V
Operation Manual
23
Waldorf
TUNING Menu (TUNE)
The Tuning menu lets you access all parameters that concern the tuning and pitch mo-
dulation of the plug-in.
To open the Tuning menu, press the TUNE button on the Plug-In panel. The button
lights up in red. Pressing it again lets you switch back to the analog user interface.
The next sections describe the individual functions in detail.
DETUNE
0 CENTS...2 OCT
You can use this parameter to detune the sub oscillator compared to the main oscillator
and get flanging or chorus-type effects, or musically useful intervals. These settings are
possible:
The setting 0 CENTS does not create a detuning effect, which can cause the signal to
be out of phase.
The setting 3 CENTS detunes the sub oscillator by 3 cent.
The setting 6 CENTS detunes the sub oscillator by 6 cent.
The setting 9 CENTS detunes the sub oscillator by 9 cent.
The setting 12 CENTS detunes the sub oscillator by 12 cent.
The setting 7SEMI detunes the sub oscillator by 7 7 semitones (a Fifth) upwards.
The setting 1 OCT detunes the sub oscillator by one octave upwards.
The setting 2 OCT detunes the sub oscillator by two octaves upwards.
MOD>OSC
ON, OFF
This parameter can be used to select the LFO as a modulation source for the pitch of
the main oscillator. This creates a Vibrato effect. Please keep in mind that no modulati-
on will take place, if the Modulation wheel is all the way down. The setting of the Mo-
dulation wheel is stored with each Program, same as on the original PPG Wave. Make
sure that TOUCH>MOD in the MODULATION menu is set to OFF, otherwise the LFO
only modulates one signal, if Aftertouch is generated at the same time.
MOD>SUB
ON, OFF
This parameter is identical with MOD>OSC, except that in this case the sub oscillator is
pitch modulated.
ENV3>OSC
ON, OFF
You can use this parameter to select the AD-Envelope 3 as a modulation source for the
pitch of the main oscillator. You can use this to create a rising pitch in the Attack pha-
Содержание PPG Wave 2.V
Страница 1: ......
