Waldorf PPG Wave 2.V, Руководство по эксплуатации

Страница: 13 / 36

PPG Wave 2.V
Operation Manual 13 Waldorf
The Program Menu
In the PPG Wave 2.V, you can simultaneously create up to eight different sounds. This
function is generally called Multi Mode. Which of the eight sounds you play, depends
on the MIDI Send channel that you use in your host application.
You can use the Program menu to select sounds for the eight MIDI channels.
To select the desired Sound Program for a channel, click on its sound name and se-
lect a Program in the appearing pop-up menu.
If you wish to play the Sound Program of the selected channel, you must set the
MIDI channel of the active Track in your host application to the same channel.
Please note that the PPG Wave 2.V only receives MIDI data on MIDI-channels 1 to 8.
Channels 9 to 16 are ignored.
���
Please note that a sufficient number of voices should be set on the PPG Wave 2.V
if you use the Program Mode, as otherwise voice “bottlenecks” could quickly
happen.
The Analog User Interface
The analog user interface offers direct access to the dials on the PPG Wave 2.V. The
Pitch Bend and Modulation wheels can be controlled both from within the Plug-In and
from your Master keyboard. Same as on the original PPG Wave 2.3, the setting of the
Modulation wheel is stored separately for each Sound Program. This lets you save a
sound with preset modulations.
The analog user interface is automatically active when you start the Plug-In. To get
back to the analog user interface from within a menu, press the corresponding Menu
button again (it will light in red).
All dials and functions are explained in the following sections.
BASIS
0...63
The Basis dial controls the position of voices within the stereo panorama (pan). If this is
set to 0, all voices are audible in the middle of the stereo spectrum. If you turn it to the
right, voices in POLY mode alternate between a left and a right pan position. In DUAL,