7
1.
Raise appliance from the floor by approx.
75mm using suitable lifting equipment (i.e.
Palletiser / Forklift) to allow rear adjustable
feet to be removed.
2.
Unscrew and remove both rear adjustable
feet from rear leg housings.
3.
Fit rear roller to rear leg housing and align
screw hole in side of rear leg housing with
threaded hole in rear roller.
4.
Secure rear roller to leg support with bolt
supplied and tighten bolt.
5.
Fit second roller and tighten.
6.
Lower appliance back to floor and adjust
front adjustable feet to level appliance.
Fig 1
Appliance
Base
Adjustable
Foot
Rear Roller
Assy
Rear Leg
Housing
Roller
Locating Bolt
