34
Operation
ENG
6.3 Calibrating light control
You can adjust and save the luminaire
brightness with which the working area is
illuminated evenly.
Prerequisites:
Light control is activated.
Brightness in the room through day-
light or other light sources is as low as
possible.
The luminaire is switched on.
NOTE:
If you calibrate the light control
while the room is illuminated by daylight
or other light sources, LUM CONNECT
MANAGE controls the luminaire bright-
ness in a high range. This can lead to the
luminaire not switching off automati-
cally even the room is bright enough.
X
Dim the luminaire until the working
area is illuminated with the required
brightness.
The set brightness is saved. If the
brightness in the sensing range of the
daylight sensor changes, LUM CON-
NECT MANAGE controls the brightness
of the luminaire so that the working area
is illuminated uniformly.
6.4 Adjusting the sensing range
of the PIR sensor
C
Fig. 23: PIR sensor, version R.
C
Fig. 24: PIR sensor, version RX.
X
Set the ball head
C
of the PIR sensor to
the required direction, see Fig. 23 and
6.5 Setting LUM CONNECT
MANAGE
Using the LIGHT ADMIN app you can set
LUM CONNECT MANAGE light manage-
ment systems to your individual require-
ments.
X
Download the LIGHT ADMIN app. The
links for downloading the app for Win-
dows, Android and iOS can be found
on our website www.light-admin.com
X
To use the LIGHT ADMIN app register
at www.waldmann.com/registration
X
Configure the parameters of the lumi-
naire via the LIGHT ADMIN app.