21
For your safety
ENG
1. For your safety
The device has been designed in accord-
ance with state-of-the-art standards, manu-
factured with utmost care using high-quality
materials, and tested.
Nevertheless, its use may constitute a risk
to persons or cause material damage.
X
Read all enclosed instructions and infor-
mation.
X
Please observe the warnings included
in the documentation and attached to
the device.
X
The device must only be used in tech-
nically perfect condition, and only by
persons being aware of the risks and
dangers involved in operating the
device.
X
Keep this document available near the
device.
X
Also read and observe the instructions
for use of the luminaire and the safety
instructions and warnings contained
therein.
1.1 Designated use
LTS/ST
: The manual switch is designed for
manual switching of the luminaires of the
LINURA series.
LDS/ST
: The distance sensor is designed
for automatic switching of the luminaires
of the LINURA series.
The maximum number of luminaires that
can be switched is limited. The total current
consumption must not exceed 3 A.
Several connected luminaires
cannot
be
switched separately.
The device
cannot
switch luminaires with
IO-Link.
1.2 Safety instructions
Explosion hazard
Operating the device in rooms subject to
explosion hazards can trigger an explosion
and result in serious injuries or death.
X
Do not
operate the device in rooms
subject to explosion hazards.
Danger due to electric shock
Improper use and faulty work on the device
may result in injuries and material damage.
X
Connection by a skilled electrician only.
X
Operate the luminaire at safety extra
low voltage (SELV) only.
X
Have maintenance and repair work
performed by the manufacturer, by a
service technician authorised by the
manufacturer or by a person with com-
parable qualification.
X
Before performing work on the device,
disconnect the device from the power
supply.
Safe mounting
A device falling down can result in personal
injuries and material damage.
X
Use only the delivered fastening ele-
ments or other suitable fastening ele-
ments available from the manufacturer.
X
Mount fastening elements correctly.
Hazard caused by unsuitable spare parts
Unsuitable spare parts can result in injuries
and material damage.
X
Use only spare parts approved by the
manufacturer.
Danger due to incident laser beam
Direct or indirect incidence of a laser beam
may result in the destruction of the LED.
X
Use the device only outside the impact
range of high-performance lasers such
as a cutting laser.
