Wahuda 60170ML-WHD, Руководство пользователя

Страница: 18 / 32

18
OPERATIONS (cont.)
WARNING!
MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE POWER
SOURCE.
3) Loosen the motor clamping handle (A) and lift the motor handle (B) to loosen belt tension
and allow the belt to be moved to another pulley.
SEE FIG 10
4) Move the belt to the desired pulley positions on both the motor and headstock pulleys.
Rotate the spindle by hand to make sure the belt is seated vertically on the selected
pulleys. Once verified, press down on the motor handle ( B in FIG 10 above) to apply
tension to the belt. Then using the motor clamp handle, (A in FIG 10 above) lock motor
into place.
NOTE: The belt does not need to be bar taut to operate correctly.
5) Close the headstock access panel (A in FIG 6 previous page) and tighten the access
panel lock screw (B in FIG 6 previous page)
6) Close the motor access door (C in FIG 8 previous page)