Wahuda 60170ML-WHD, Руководство пользователя

Страница: 14 / 32

14
ASSEMBLY & ADJUSTMENTS
WARNING! MAKE CERTAIN THAT THE MACHINE IS DISCONNECTED FROM THE
POWER SOURCE BEFORE ASSEMBLY AND ADJUSTMENTS
NOTE: 95% of the machine comes fully assembled. If you need help assembling the
remaining 5%, use the parts diagram and parts list at the back of this manual for
assistance.
CARRYING HANDLES
1.
Locate the 2 carrying handles and 4 screws (E on previous page) and attach them
to each end of the lathe. See FIG 1
POWER CABLE HOOKS
1)
Locate the 2 power cable hooks and 4 screws (F on previous page) and mount the
hooks facing inwards into the pre-drilled holes in the rear of the bed. See FIG 2 & 3